Anwendungshinweise und Sicherheitsinformationen


Diamond Vision

Es gibt 2 Möglichkeiten, Diamond Vision anzuwenden.

Methode 1: Auf das saubere, trockene Glas auftragen, indem leicht über das gesamte Fenster gesprüht wird. Arbeiten Sie an 1 bis 2 Fenstern gleichzeitig und lassen Sie Diamond Vision ca. 30 Sekunden aushärten. Anschließend das Produkt mit klarem Wasser abspülen. 

Methode 2: Mit 2 bis 3 Sprühstößen Diamond Vision grob auf das Fenster auftragen. Anschließend mit einemsauberen, trockenen Schaumstoffapplikator das Produktin gerader Linie auf dem Glas verteilen. Sobald das Fenster vollständig bedeckt ist, entfernen Sie das überschüssige Produkt sofort mit einem dünnen, sauberen und trockenen Mikrofasertuch.

Sicherheitsinformation:

Nur für Fahrzeugaußenscheiben. Kontakt mit Gummi und Kunststoff vermeiden.

Nicht im Fahrzeuginnenraum verwenden. Tragen Sie Diamond Vision in einer gut belüfteten, vorzugsweise staubfreien Umgebung auf.

Tragen Sie immer Handschuhe bei der Verwendung von Chemikalien und vermeiden Sie den Kontakt mit der nackten Haut. Wenn sich bei der Anwendung von Diamond Vision eine Reizung entwickelt, sofort anhalten und den betroffenen Bereich mit reichlich kaltem Wasser waschen und sanft schrubben. Diamond Vision verursacht Reizungen der Augen und der Luftwege. Halten Sie sich immer gegen den Wind auf. Wenn Diamond Vision auf die Augen trifft, spülen Sie die Augen gründlich mit Augenspülungen aus. Außerhalb der Reichweite von Kindern aufbewahren! Bei Verschlucken, wenden Sie sich an Ihren örtlichen Notdienst und führen Sie kein Erbrechen herbei.



Citrus Pre Wash

Es lässt sich am besten mittels einer Sprühflasche direkt auf den Lack auftragen. Anschließend sollte Citrus ca. 1 Minute einwirken, bevor es gründlich mit einem Hochdruckreiniger abgewaschen wird - Top to bottom Anwendung für optimale Ergebnisse. 5:1 - 100:1 verdünnbar.

 



Insect Strip

Hochwertige Komponenten ermöglichen eine schnelle, gründliche und vor allem schonende Reinigung.

Wie bei unseren anderen Produkten ist auch Insect Strip überaus einfach in seiner Anwendung – einfach auf die Kühle Oberfläche aufsprühen, kurz einwirken lassen und mit einem Hochdruckreiniger abwaschen.

 



APX

Safety information: For use on automotive applications only. Avoid contact with bare metal and aluminium. Do not use on leather or suede. Apply APX in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using APX stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. APX will cause skin burns and eye damage. Always stand up wind of any spray. If APX encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting. 

How To Use: Always test fabrics for colour fastness before use. Apply a light mist to fabric, wheel arch liners, door shuts and other contaminated areas of your vehicle. APX can be used to remove mold and algae from your vehicles interior or exterior. For external applications always apply with a soft brush and pay particular care on painted surfaces where contamination could result in scratching of the body panels.



liquefy

How To Use: Spray Liquefy directly on to areas of your vehicle with built up tar and glue deposits. The product will quickly break down these contaminants allowing you to either rinse them away or remove using an appropriate cloth. Do not allow Liquefy to dry on your paintwork or glass. If you are unsure an area is safe to have Liquefy applied, test in a hidden area first.

Safety information: For use on automotive finished paintwork and glass only. Avoid contact with bare metal, aluminium and unpainted plastic. Do not use on vehicle interior. Apply Liquefy in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Liquefy stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Liquefy will cause irritation to eyes and airways. Always stand up wind of any spray. If Liquefy encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



liquid fire

Anwendung: Für ein perfektes Ergebnis einfach das gesamte Fahrzeug großzügig auf die kühle Felge einsprühen und abwarten, bis sich die Farbe verändert. Anschließend gründlich abwaschen und den Vorgang wiederholen, bis keine Verfärbung mehr zu erkennen ist.

 

Für alle Felgen mit einem Klarlack Finish bedenkenlos anwendbar.



wipe out

Wipeout ist für die Verwendung in einer Foam Lance prädestiniert. Je nach Grad der Verschmutzung, werden folgende Mischungsverhältnisse empfohlen:

- Normale Reinigung 10:1

- Mittelstarke Verschmutzungen 5:1

- Extreme Verschmutzungen 2:1

  

Anwendung: Den Snowfoam einfach vor der Wäsche direkt auf das Fahrzeug aufsprühen und max. 5 Minuten einwirken lassen. Anschließend mit einem Hochdruckreiniger gründlich abwaschen. 

  

Tipp: Für ein perfektes Ergebnis im Anschluss eines unserer zahlreichen Shampoos verwenden.



Pure

Safety information: For use on automotive exterior only. Do not use on vehicle interior. Apply Pure Shampoo in an open area preferably away from other vehicles and property. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Pure Shampoo stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Pure Shampoo will cause irritation to eyes. If Pure Shampoo encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.

 

How To Use: Pure Shampoo is a highly concentrated luxury shampoo with no added waxes or polymers. Apply a small amount to your wash bucket and agitate with a pressure washer. Pure Shampoo can be diluted up to 2000:1 depending on your requirements. Do not allow Pure Shampoo to dry on to your vehicles bodywork or glass. Rinse your vehicle thoroughly after use using a pressure washer.



Dark glaze / light Glaze

Safety information: For use on finished automotive paintwork only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Apply Dark Glaze out of direct sunlight, preferably in a dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Dark Glaze stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Dark Glaze will cause irritation to eyes. Always check your work area after using Dark Glaze and remove any polish splatter from paintwork immediately. If Dark Glaze encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.

How To Use: Dark Glaze is designed to enhance gloss and vehicle appearance by chemically cleaning the paintwork and using pigmented silicone fillers to conceal defects like fine scratches. Hand Application: Apply 2 or 3 pea size drops to a soft foam or microfiber pad and dab onto several areas of the panel you are working on, begin to spread evenly in overlapping circular motions until the panel is completely covered with a thin layer of product. Allow up to 5 minutes to cure before removing with a clean dry microfiber towel. By Machine: Begin by seasoning your soft finishing pad with a single spray of water, apply 3 pea size drops of Dark Glaze to the pad and dab the glaze on several areas of the body panel. Set your machine to its slowest speed and begin to gently guide the machine in overlapping straight lines, using no pressure. Allow up to 5 minutes to cure before removing with a soft microfiber towel.



supergloss+

How To Use: Apply SuperGloss+  to clean dry paintwork only, we recommend fully decontaminating your paint before application including removal of any previous waxes. Spread SuperGloss+  lightly on 1-2 panels at a time using a dry foam application pad. Allow 10 minutes to cure before removal with a clean dry microfiber towel. Do not apply SuperGloss+  in direct sunlight, adjust curing time to suit your environment and monitor your work area closely. Allow 1-12 hours before applying a second coating of SuperGloss+

Safety information: For use on finished automotive paintwork only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Apply in a dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using SuperGloss+ stop use immediately and wash the affected area with plenty cold water and introduce gentle scrubbing. SuperGloss+  will cause irritation to eyes. If SuperGloss+ encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



rapid Detailer

Performance Expectations: Rapid Detailer provides a fast easy to use gloss enhancement and protection to any finished painted surface. While it is also suitable for matte and wrapped vehicles we would recommend our Glass Canopy Polymer Sealant for these application for best results on these surfaces. Rapid Detailer is also safe and highly effective on glass, providing a fast streak free finish and adding a respectable layer of protection. Over application on windshield may cause minor streaking/ hazing. Rapid Detailer is a well-balanced product providing both visual enhancement and protection. While not classed as a powerful sealant or LSP Rapid Detailer can be used as a stand-alone protection and is expected to last for around 8 weeks. Results will vary slightly depending on vehicle preparation and environmental conditions.

How To Use: Lightly mist Rapid Detailer onto the vehicle 1 panel at a time. There is no cure time for this product, remove using a high quality soft microfiber towel before the product dries in. Spray onto a freshly washed and still wet vehicle to use as a highly effective drying aid. Rapid Detailer is also a perfect clay lubricant, window cleaner and sealant. Because it evaporates away and requires no buffing Rapid Detailer works very well as a glass sealant/ cleaner which never streaks however care should be taken not to apply to your windscreen. 

Safety information: For use on finished automotive paintwork only. Avoid contact with vehicle windscreen. Do not use on vehicle interior. Apply Rapid Detailer in a well ventilated area. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Rapid Detailer stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Rapid Detailer may cause irritation to eyes and air ways. Always stand up wind of any spray. If Rapid Detailer encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



qdx

To Use: Apply QDX to clean dry paintwork only, we recommend fully decontaminating your paint before application including removal of any previous waxes. Spray QDX lightly on 1 panel at a time and spread using a soft foam pad or ceramic application sponge. Allow 3-10 minutes to cure before removal with a clean dry microfiber towel. Do not apply QDX in direct sunlight or allow to dry on your vehicle, adjust curing time to suit your environment and monitor your work area closely. QDX can also be sprayed and wiped clear using a microfiber towel like a conventional Rapid Detailer spray with a reduced durability using this method.

Safety information: For use on finished automotive paintwork only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Apply QDX in a well ventilated preferably in a dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using QDX stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. QDX will cause irritation to eyes and air ways. Always stand up wind of any spray. If QDX encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



express sealant

Anwendung:  Aufgetragen werden kann Express Sealant via Sprühflasche, Pump Sprayer oder Snowfoam-Lance.

Express Sealant kann sowohl auf nassem, als auch auf trockenem Untergrund angewendet werden. Nach dem Auftragen einfach kurz einwirken lassen und anschließend mit einem Hochdruckreiniger abspülen. Gründlich abtrocknen - fertig.

 

Achtung: Express Sealant darf nicht eintrocknen und muss unbedingt rückstandslos abgewaschen werden.



turbo 6



glass canopy

How To Use: Glass Canopy Liquid Sealant is an advanced reactive silicon polymer formula. Designed with longevity in mind this powerful sealant should be used on your vehicles painted surfaces only. Apply to a clean, dry vehicle by misting a little on a microfiber towel or application pad and carefully spreading on the paint surface. Never spray Glass Canopy Liquid directly onto the paint surface. As soon as the solution is applied to the paint the chemical bond will begin, you should allow 15 minutes maximum before removing using a short nap, lint free microfiber towel. Ensure any residue is removed completely. Once applied you can expect up to 12 months’ protection from Glass Canopy Liquid Sealant. Do not use in direct sunlight or on glass.

 

Safety information: For use on automotive applications only. Do not use on vehicle interior. Apply Glass Canopy Liquid in a well ventilated preferably dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Glass Canopy Liquid stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Glass Canopy Liquid may cause irritation to eyes and air ways. Always stand up wind of any spray. If Glass Canopy Liquid encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



spotless

How To Use: Apply Spotless directly to your vehicles glass by misting a fine amount over each window. Avoid over saturating the glass as the product may run onto other parts of the vehicle. Remove using a glass microfiber or strong absorbent paper towel in straight line sweeps over the glass. Finish by removing any residues with a dry lint free microfiber towel. Removal of vape residue: Spray Spotless onto a plush, lint free microfiber towel and wiper over the effected area until completely saturated. Wait 60 seconds and begin removal using a glass microfiber or absorbent paper towel until glass is clear.

 

Safety information: For use on automotive glass only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Apply Spotless in a well ventilated preferably in a dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Spotless stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Spotless may cause irritation to eyes and air ways. Always stand up wind of any spray. If Spotless encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



fresh interior

Achtung: FRESH darf nur auf Kunststoff, Vinyl, Stoff und Teppich angewendet werden. Vermeide den Kontakt mit Lack, Glas, blankem Metall und Wildleder. Anwendung auf Glattleder möglich. Vorher auf einer nicht sichtbaren Fläche testen. Safety information: For use on automotive interior plastic, vinyl, fabric and carpet only. Avoid contact with Paintwork and Glass. Do not apply to bare metal finishes. Apply Fresh in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Fresh stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Fresh will cause irritation to eyes, and air ways. Always stand up wind of any spray. If Fresh encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.

How To Use: Apply Fresh to your vehicles interior plastics for a clean and fresh interior which feels as clean as it looks. Fresh can be sprayed directly on to your interior plastics or a cloth beforehand to prevent overspray on glass. Fresh is suitable for carpet and fabric general cleaning. Apply a generous amount on to the effected area and scrub using a suitable brush or cloth. Fresh has antibacterial properties and a matte finish leaving your interior clean and fresh.



finale

How To Use: Apply Finale to your vehicles interior plastics for a clean and fresh interior which feels as clean as it looks. Finale can be sprayed directly on to your interior plastics or to a cloth beforehand to prevent overspray on glass. Finale is also suitable for use on engine bay plastics, foot well rubbers, external trim areas and scuttle panels. Finale can be diluted up to 5:1 depending on application.

 

Safety information: For use on automotive unpainted plastic only. Avoid contact with Paintwork and Glass. Do not apply to bare metal finishes. Apply Finale in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Finale stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Finale will cause irritation to eyes, and air ways. Always stand up wind of any spray. If Finale encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



This one of a kind tyre and trim restorer is the only wax on the market designed specifically for plastic and rubber substrates. Looking for a fast, easy no mess application that will last for multiple weeks? Rubber wax will provide you with a long lasting oem finish that beads water and dirt just like a traditional wax for your paintwork. The unique Si02 wax formulation is soft and easy to spread, simply apply a thin layer and allow to cure for up to 15 mins. There is no need to remove any residue! You're good to go.



incinerate

Incinerate is a very powerful Alkaline wheel cleaner which can be diluted 25:1 depending on application. Great for wheels which have not been cleaned properly in some time right down to regular washing of sealed wheels incinerate has you covered! Because it foams up you get a better product stick and coverage allowing you to brush in the solution for maximum effect and coverage. Incinerate works even faster is used through a standard spray bottle on very dirty wheels. Suitable for all finished painted wheel surfaces Not suitable for chrome wheels, split rims or paint without clear-coat applied.

--

Safety information: For use on automotive finished painted wheels only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Do not apply to Chrome, Bare aluminium, bare metal or painted wheels which have no lacquer applied. If in doubt apply to a hidden area first.  Apply incinerate in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using incinerate stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. incinerate will cause serious irritation to eyes, skin and air ways. Always stand up wind of any spray. If incinerate encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.

How To Use: Spray incinerate directly on to your vehicles wheels prior to rinsing. If the wheel has light soiling you may be able to simply jet wash incinerate off after 30 seconds to remove all contamination. For heavier soiling you may need to use a soft brush to agitate incinerate before rinsing off. Never allow incinerate to dry on your wheels or sit for more than 5 minutes prior to removing. If you accidentally spray incinerate onto your cars paintwork, rinse off quickly.



Tyre Coat

How To Use: Apply Tyre Coat directly on to a sponge or microfiber tyre applicator. Only apply to clean dry tyres for best results. We recommend using Infinity Wax APX and a soft brush to thoroughly cleanse the tyre wall before first application. Tyre Coat should be applied neat using a very small amount, 1-2 sprays on to a sponge applicator should cover around 50% of your vehicles tyre.

Safety information: For use on automotive tyres only. Avoid contact with Paintwork and Glass. Do not use on vehicle interior or exterior plastic. Do not apply to bare metal finishes. Apply Tyre Coat in a well ventilated environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using Tyre Coat stop immediately and wash the effected area with plenty cold water and introduce gentle scrubbing. Tyre Coat will cause serious irritation to eyes, and air ways. Always stand up wind of any spray. If Tyre Coat encounters eyes rinse thoroughly with eye wash. Keep out of reach of children! If swallowed contact your local emergency services and do not induce vomiting.



ghost

Anwendung: 

Sprühen Sie Ghost Sio2 Wheel Sealant direkt auf die Felge und verteilen Sie das Produkt mit einem feuchten Mikrofasertuch über die gesamte Felge. Lassen Sie das Produkt 10 Minuten aushärten. Verwenden Sie ein sauberes, trockenes Mikrofasertuch und polieren Sie das überschüssige Produkt aus.